Portable Copper/Copper Sulfate Reference Electrode

The Portable Reference Electrode (Cu/CuSO4) ENES-RE-5M, is created to measure the potential difference between an underground structure protected by cathodic polarization and the ground.
The electrode is available in two versions — the standard one and the one with an extended holder.

Advantages

It has transparent walls to control the electrolyte level.
The removable tip is easily detached from the electrode casing and has three standard versions:
1) The version with a wooden membrane has a pointed end and is convenient for short-term measurements in soft ground;
2) The version with ceramic membrane is universal: can be used for both short-term measurements and long-term;
3) The version with 2 membranes (ceramic membrane and ion exchange plate) is recommended for long-term measurements.
4) In the standard version, the delivery set includes an external electrode, and the terminals are located on the end (plug) of the holder.

At the request of the customer, it is possible to manufacture a reference electrode without an external electrode and/or with the placement of terminals on the side surface of the holder. These requirements shall be reflected in the questionnaire.

The electrode can be easily disassembled for the possibility of cleaning the copper rod or replacing it.
The remote electrode can be installed at a convenient distance from the membrane (from 6 to 20 cm).
In the electrode, it is easy to replace an old electrolyte with a fresh solution.