The metal Test Post SKIP is created for electrochemical protection and monitoring of the corrosion state of pipelines and other underground metal structures.
The Test Post Rack TPR (SKIP) is designed for catodic protection and monitoring of the corrosion state of pipelines and other underground metal structures in accordance with GOST R 51164-98 and GOST 9.602-2016. The products are manufactured for UKhl 1 (moderately cold climate) climatic conditions in accordance with GOST 15150-69. They are designed for outdoor use. They are installed in settlements and industrial areas.
Also, the product can be called Universal station US (UK), test station TS.
Structural features
The SKIP is made as rack produced from a pipe with a hexagon section with a circumscribed circle diameter of 120 mm or from a round pipe Ø 114 mm (SKIP-1), or from a pipe with a hexagon section with a circumscribed circle diameter of 158 mm or from a round pipe Ø 159 mm (SKIP-2), with a headrest installed on it, inside of which there is a terminal panel.
The SKIP can be supplied coming with a PM-0.4 magnesium sacrificial anode installed on ta housing. The sacrificial anode protects the SKIP metal housing from corrosion and increases the service life of the TPR by 20%. Product weight no more than 40 kg. The product is painted with polymer weather-resistant paint. It can be painted entirely in one color or, at the request of the customer, in different colors, the headrest and the rack.
Number of measuring clamps up to 32 pieces, cross-section of conductors up to 10 mm².
Advantages
- Easy access to power and measuring terminals. The design of the measuring and powered terminals of the rack provides the ability to connect wires and cables to them without special termination.
- Possibility of installing a diode-resistor unit BDR on the SKIP.
Attention! When ordering the SKIP without specifying in the questionnaire the requirements for the performance of the rack, the customer is made with a rack made of a pipe having a hexagon in cross section.
| Parameters | Norm | ||
| SKIP-1 | SKIP-2 | ||
| Overall dimensions, mm |
260×260×Н Н=2000(2500) |
260×260×Н, Н=2000(2500) |
|
| Diameter of the described rack circle with a section in the form of a hexagon, mm | |||
| 120 | 158 | ||
| Diameter of a rack from a circular pipe, mm | |||
| - external | 114 | 159 | |
| - internal | 107 | 152 | |
| Weight, kg, no more than | |||
| - racks from a pipe with a cross-section in the form of a hexagon | 20 | 25 | |
| - racks made of a circular pipe | 25 | 35 | |
| Cross-section of wires, mm | |||
| - measuring | to 10 | to 10 | |
| - powered | to 50 | to 100 | |
| Number of terminals, pcs | |||
| - measuring | to 32 | to 32 | |
| - powered | to 16 | to 16 | |
| Service life, years, not less than | 20 | ||
| СКИП |
Стойка контрольно-измерительного пункта |
| Х- |
Исполнение стойки СКИП |
| Б- |
Возможность установки БДР(М) |
|
Х- |
Количество измерительных клемм |
| Х- |
Количество силовых клемм
|
|
Х- |
Общая высота стойки СКИП |
|
УХЛ1 |
Климатическое исполнение и категория размещения по ГОСТ 15150-69 |
|
-ПТ |
Наличие плакатного трассоуказателя (крышки-плаката) |
Стойка контрольно-измерительного пункта из трубы сечением в виде шестигранника с диаметром описанной окружности 120 мм, с возможностью установки БДР(М), с 10 измерительными клеммами, 6 силовыми, высотой 2,5 м, климатического исполнения УХЛ1 с плакатным трассоуказателем:
СКИП-1-Б -10-6-2,5-УХЛ1-ПТ ТУ 3663-003-73892839-2006.
To purchase equipment, leave a request on the website or contact us:
The manager will contact you to clarify the parameters of the equipment and order details.
The exact cost, terms and conditions of delivery are calculated after filling out a questionnaire or clarifying the requirements for equipment.
The information on the site is only for introductory purposes. Not a public offer.
|
Our experts will answer any question about the product
|
Ask a question
|
PSS Corporation. Cathodic protection equipment.
