The Reference electrode (Cu / CuSO4) ENES-1 (ENES-1M), ENES-2 (ENES-1MS2) is used in ECP systems to measure the potentials of a structure to be protected from corrosion destruction and the effectiveness of an electrochemical protection system.
Read more
Certificate ГАЗСЕРТ
ЮАЧ1.RU.1404.H00010
ЮАЧ1.RU.1404.H00010
Description
Purpose of the Copper Sulphate Reference Electrode ENES-1, ENES-2
The non-polarizable copper sulfate reference electrodes ENES-1, ENES-2 are designed to measure the polarization potential and potential of an underground structure relative to the electrode. It is used as a separate product, as well as in a complex of automatic maintenance of a given potential difference. Measurement with a copper sulfate electrode ENES-1 is carried out by mobile or stationary control and measuring devices.
Description of the Copper Sulphate Reference Electrode ENES-1, ENES-2
The potential difference is measured by creating an electrolytic connection. The electrolyte is located inside the device body and is protected from leakage by means of special ion-exchange membranes, due to which reliable contact is also ensured. They are installed in the ground with conductors leading to test post (KIP) or carpet, as well as systems for automatic control and regulation of the operating mode of electrochemical protection installations.
The potential sensor installed on the product enables the use of the ENES-1\2 non-polarizable electrode as an element of the automatic transformer rectifier: it transmits the indicators and the station parameters are automatically controlled.
The ENES-1-RA electrode consists of a plastic case filled with a gel-like electrolyte, a copper rod with a conductor, an ion-exchange membrane, and a sensor. To protect an ion-exchange membrane, a grill is installed in the lower part.
Modification 1M means that the electrode is packed in a cloth bag.
The ENES-2-RA electrode (ENES-1MS-2-RA) has two ion-exchange membranes or one thickened membrane.
The product is supplied ready for use, no additional accessories or electrolyte filling are required.
The PSS Corporation managers are always ready to provide detailed advice on the selection, installation and operation of equipment, as well as the price of the Copper Sulfate Reference Electrode ENES-1. Goods can be delivered to any region of the Russian Federation or the CIS, the Company’s consultant will inform you about time and delivery terms.
The potential sensor installed on the product enables the use of the ENES-1\2 non-polarizable electrode as an element of the automatic transformer rectifier: it transmits the indicators and the station parameters are automatically controlled.
The ENES-1-RA electrode consists of a plastic case filled with a gel-like electrolyte, a copper rod with a conductor, an ion-exchange membrane, and a sensor. To protect an ion-exchange membrane, a grill is installed in the lower part.
Modification 1M means that the electrode is packed in a cloth bag.
The ENES-2-RA electrode (ENES-1MS-2-RA) has two ion-exchange membranes or one thickened membrane.
The product is supplied ready for use, no additional accessories or electrolyte filling are required.
The PSS Corporation managers are always ready to provide detailed advice on the selection, installation and operation of equipment, as well as the price of the Copper Sulfate Reference Electrode ENES-1. Goods can be delivered to any region of the Russian Federation or the CIS, the Company’s consultant will inform you about time and delivery terms.
Specifications
| Denomination | Value |
| Transient electrical resistance ENES-1-RA, (ENES-1M-RA) in the range | 0.1…2.5 kiloohm |
| Transient electrical resistance ENES-2-RA (ENES-1MS-2-RA) no more than | 15.0 kiloohm |
| Potential with respect to silver chloride electrode | 100±20 мВ |
| The amount of gel electrolyte in the electrode is not less than | 120 cm3 |
| Standard cable grade | PV * |
| Lead-outlet length | 1700 mm** |
| Electrode gross weight (with standard cable) | no more than 0.4 kg |
| Full weight of ENES-1M-RA electrode (with standard cable) |
no more than 0.65 kg |
| * The length and brand of the cable are made at the request of the customer. | |
| ** The length of the cable leads can be from 1.7 m to 300 m | |
| The presence of traces of moisture remaining after acceptance tests on the lattice of the ion-exchange membrane is allowed | |
Modifications
|
||||||
|
Documents
eb1e9110abb70884423a57b0ddead41e
673.4 Кб
How to buy
To purchase equipment, leave a request on the website or contact us:
The manager will contact you to clarify the parameters of the equipment and order details.
The exact cost, terms and conditions of delivery are calculated after filling out a questionnaire or clarifying the requirements for equipment.
The information on the site is only for introductory purposes. Not a public offer.
|
Our experts will answer any question about the product
|
Ask a question
|
PSS Corporation. Cathodic protection equipment.
